Many companies have come up with their Raspberry Pi RP2040 boards. Adafruit being one of them has unveiled its two
Piunora, an open-source carrier board, is based on Raspberry Pi Compute Module 4. Crowd Supply funded this board on 11th
Yet another RISC-V-based development board with GreenWaves Technologies’ powered chip has brought us the Perf-V Beetle board for AI edge
A widely used communication protocol these days is the USB. Despite its popularity, the protocol’s analysis and hacking tools are tight. Hence, the ones that are available are usually either costly or difficult to use. With their new offering, Great
AAEON, a leader in industrial embedded computing platforms, recently came up with the GENE-CML5 3.5” subcompact board. Unlike other SBCs, this board features an LGA1200 socket for using an Intel CPU of your choice. The GENE-CML5 3.5” subcompact board offers
MirkoPC is a Hackaday.io project developed by Mirek, a Polish developer. It is a Raspberry Pi desktop computer based on Compute Module 4 (CM4). Further, the developer is branding the MirkoPC board under Mirko Electronics. However, being an open-spec board,
The ESP32-S2 single-core Wi-Fi processor from Espressif System has an RGB LCD interface that makes it suitable for multimedia applications. The ESP32-S2-Kaluga-1 also a Multimedia Development Board with a touchscreen display and a camera was released two years ago. Espressif,
Piunora, an open-source carrier board, is based on Raspberry Pi Compute Module 4. Crowd Supply funded this board on 11th May 2021 with the goal of $15000. Further, this easy-to-use development board works well for electronics prototyping with Linux. Moreover,
Marlin takes a step into the next generation of 3D printing firmware with Marlin 2.0. Marlin now finally supports 32-bit boards from this generation. So what’s new about this firmware? and how does it differ from the 1.1.X generation? let’s
Famous embedded board developer Arduino has announced Arduino Portenta Machine Control, which adds up to its Pro lineup of products. According to Arduino, it’s a fully-centralized, low-power, industrial control unit able to drive equipment and machinery. The board comes with
The T-micro32 Open-Smartwatch is designed by Paul’s 3D Things, manufactured and developed by the Chinese electronics specialist LILYGO. It is based on the T-micro32 module and features a wide range of wireless connectivity through the support of Wi-Fi and Bluetooth.
Qortex founder Amine Mehdi Mansouri has developed a Wi-Fi and LoRa messaging IoT platform, ‘Axon’, which works on serial communication. “Imagine giving your Arduino or Raspberry Pi the ability to wirelessly send messages just like you do on your smartphone
With a simple firmware upgrade, you get an important safety net and additional features for free. This article is a step-by-step guide on using an Arduino UNO to burn a bootloader on your printer board and upgrade the Marlin firmware
Xilinx has entered the System on Module (SOM) markets with the Xilinx Kria SOM and Vision AI starter kit. Xilinx Kria SOM K26 is a new way of deploying Xilinx platforms. It comes along with pre-built hardware, software that are…
MirkoPC is a Hackaday.io project developed by Mirek, a Polish developer. It is a Raspberry Pi desktop computer based on Compute Module 4 (CM4). Further, the developer is branding the MirkoPC board under Mirko Electronics. However, being an open-spec board,…
Piunora, an open-source carrier board, is based on Raspberry Pi Compute Module 4. Crowd Supply funded this board on 11th May 2021 with the goal of $15000. Further, this easy-to-use development board works well for electronics prototyping with Linux. Moreover,…
